Iconic Citizen diving watch with depth sensor - Citizen Promaster Aqualand JP2000-08E

Official reseller
We are an official reseller of all brand's watches that we sell. That equals to: genuine watches with valid warranty and access to official service.

Depth sensor
An advanced pressure sensor measures changes in water pressure and displays current depth on the dial/screen. It can handle dives down to 80 meter's depth.

Dive- and depth alarm
This watch is equipped with two advanced alarms, aiimed for divers.
1. Depth alarm: Insert maximum dive depth, and when the watch's sensor sense that you've surpassed that depth, it will alert you with the alarm for 15 seconds. After that, it will reoccur every minute, until you are back within your desired depth.
2. Dive alarm: Set the desired diving time, using intervals of 5 minutes (for a maximum of 310 minutes). The alarm will be active for 30 seconds, once the time is up.

Dive-log: 4 sets
This watch saves the last 4 dives, and the data saved in the log are: the time and date that the dive started, and how long it lasted including the deepest depth.

Decompression alarm
This watch has an alarm that is activated if and when it registrates a too fast ascent.

Energy level
The level of energy for this watch's battery is displayed on the dial/screen.

Chronograph
Used for measuring time intervals (also called: Stopwatch). Often constructed as smaller dials in the center of the major dial.

Daily alarm
The daily alarm uses an acoustic signal to remind you of repeating events.

Auto-calendar
The watch automatically adjust for different months different lengths, and for leap years.

Water protection: 200 meter (20 bar)
This watch can be worn while swimming/snorkeling (near the surface). The value refers to the pressure in water, at that depth, while motionless... and should not be seen as the depth for wearing the watch..

Condensation - important!
Rapid changes in temperature can cause condensation inside the watch. If you notice moisture beneath the glass, you should immediately go to a watchmaker, who can open and dry the watch. Even if the signs of moisture disappears, by themselves... the moisture will not - and will eventually damage your watch - so, visit a professional and remove it permanently. Even waterproof watches are not protected against condensation, so keep that in mind if you plan to go from very hot to very cold temperatures - like from a hot sauna directly to the snow. If condensation occurs, it very rarely (if ever) depends on manufacturing, so if your watch is damaged by moisture, warranty will probably not cover it (it could be manufacturing issues, but... most likely it will be because of the rapid change of temperature = natural causes).

Case made of stainless steel.

Screw crown
Prevents penetration of water. To set the watch, the crown must first be screwed up.

Rubber strap
Light and soft, but still flexible and durable.

Luminous layer
A luminous layer provides a long-term lightning effect in the dark. It requires only a short-term exposure to light. Usually the pointers, and sometimes the hour markers are coated with this.

Rotating bezel
This watch is equipped with a rotating bezel, which can be used to mark the beginning/ end of a time interval.

Quartz Watch
A battery-powered quartz watch is controlled by fluctuations in a crystal of the mineral quartz. These oscillations change very little over time, which is why quartz is often used - because it retains its accuracy.

This product description is created specifically for Watchia.com and may not be copied (in whole or in parts)! Violation will therefore be met by demands of compensation.