OceanX Sharkmaster 1000 Meters Automatic Diver SMS1054
This impressive watch is from the brand OceanX, who produces high-quality diver's watches for a really good price compared to other watches with the same specifications. The watches are created in top quality materials and special constructions that you know from the expensive brands. Watchia.com is an official online retailer of . You receive a 100% authentic watch, that has been quality checked by OceanX together with the original box and warranty papers.
Automatick Clockwork
This has an NH35A automatic clockwork, which has 24 jewels and up to 41 hours of power reserve.
Rotating bezel
This watch is equipped with a rotating bezel, which can be used to mark the beginning/ end of a time interval.
Screw crown
Prevents penetration of water. To set the watch, the crown must first be screwed up.
Helium valve
This watch is equipped with a helium valve, which equalizes air pressure while you are diving, to prevent damage to the watch.
Date display
The date is shown on the display.
Stainless steel bracelet
Tough, durable and elegant; a bracelet made of stainless steel gives the watch a classic quality look.
Sapphire glass
Sapphire is up to 7 times harder than steel, and surpassed only by diamonds on the Mohs scale. This makes sapphire glass a great protection for your watch.
Automatic clockwork
This watch automatically charges from the energy caused by your movement. If the battery is emptied, it only needs a few seconds of movement/energy to start working again.
Water protection: 1000 meter (100 bar)
This watch can be worn while diving. The value refers to the pressure in water, at that depth, while motionless... and should not be seen as the depth for wearing the watch..
Condensation - important!
Rapid changes in temperature can cause condensation inside the watch. If you notice moisture beneath the glass, you should immediately go to a watchmaker, who can open and dry the watch. Even if the signs of moisture disappears, by themselves... the moisture will not - and will eventually damage your watch - so, visit a professional and remove it permanently. Even waterproof watches are not protected against condensation, so keep that in mind if you plan to go from very hot to very cold temperatures - like from a hot sauna directly to the snow. If condensation occurs, it very rarely (if ever) depends on manufacturing, so if your watch is damaged by moisture, warranty will probably not cover it (it could be manufacturing issues, but... most likely it will be because of the rapid change of temperature = natural causes).
Size
This watch has a width of 44 mm (the dial, measured from left to right, with the crown excluded).
Even if some watches are not perfectly circle-shaped, we still use the term: diameter - and we only measure the case, completely ignoring the crown (even though some include it, in their measurements).
Case made of stainless steel.
Sizes
Does this watch fit your wrist? Wristwatches has gradually become larger in size, and a typical men's watch is usually between 40 and 45 mm wide. If you have a wrist that is noticeable larger/smaller, we recommend that you focus on the sizes in/outside the outer edges of the typical sizes. You are always welcome to contact our support, so we can share our experience with you.
Safety mechanism
This watch has an extra safety mechanism, which prevents the lock from getting opened by accident.
Luminous layer
A luminous layer provides a long-term lightning effect in the dark. It requires only a short-term exposure to light. Usually the pointers, and sometimes the hour markers are coated with this.
This product description is created specifically for Watchia.com and may not be copied (in whole or in parts)! Violation will therefore be met by demands of compensation.
| Diameter | 44 mm |
|---|---|
| Case depth | 17 mm |
| Modelnumber | SMS1054 |
| EAN | SMS1054 |
| Brand | OceanX |
| Gender | Men |
| Strap type | Stainless steel |
| Strap color | Rosegold, Silver |
| Strap width | 21 mm |
| Band length | 14-24 cm |
| Link type on strap | Screw links |
| Clasp Type | Deployment clasp |
| Case material | Stainless steel |
| Case color | Rosegold, Silver |
| Color of dial | Black, Grey |
| Glass | Sapphire |
| Water resistance | 100 atm (diving) |
| Movement | Automatic |
How is the size of the watch measured?
The diameter
The common term is diameter, but since not all watches have circular watch cases, the diameter is actually the width measured from left to right. Note that some manufacturers include the crown (to set the clock) and the buttons when measuring the width, but we try to standardize all the watches by not including the crown as part of the measured width.
The thickness - or height of the watch in profile - is indicated by measuring the watch from top to bottom as illustrated below. By comparison, a 1-euro coin is 2.33 millimeters thick.
One usually defines the watches with these numbers:
Slim: 4-6 millimeter
Normal: 6-12 millimeter
Big: 12-14 millimeter
Oversize: 14-18 millimeter
If you buy this watch together with: and ; tools to easily adjust/replace your bracelet/strap, we will give you a big discount.
We also recommend , for removing scratches on metal - or if you just want to make it look new again. If you have scratches on glass, then this is the item for you: .
