Oris Artelier Calibre 112 01 112 7726 4055-Set 1 23 72FC
This elegant wristwatch is designed and produced by the Swiss brand; Oris, and belongs to the collection: .
We are an official reseller of watches from , and the watch will arrive to you in their official gift box. All watches sold on Watchia.com are genuine and comes with official and valid warranty. You also get 2 year extended warranty on your Oris watch = a total of 4 years, when the watch is purchased at Watchia.com!
Official reseller
We are an official reseller of all brand's watches that we sell. That equals to: genuine watches with valid warranty and access to official service.
Swiss Oris 112 automatic clockwork
This watch is powered by a Swiss Oris 112 automatic clockwork. It has 40 jewels and 240 hours reserve (the time that it will keep going, if the batteries are 100% charged when the watch is taken off).
12/24-hour timing
The time can be specified either in a 12 hour (AM/PM) or in a 24 hour format.
Luminous layer
A luminous layer provides a long-term lightning effect in the dark. It requires only a short-term exposure to light. Usually the pointers, and sometimes the hour markers are coated with this.
Date display
The date is shown on the display.
Seethrough case
This watch has seethrough section(s), so you are able to see the mechanic and movement of the clockwork.
Crown button lock
Protects the crown's functions from being changed accidentally.
Indicator for battery power
An indicator shows the current level of the battery.
Leather Strap
This strap is made of leather.
Sapphire glass
Sapphire is up to 7 times harder than steel, and surpassed only by diamonds on the Mohs scale. This makes sapphire glass a great protection for your watch.
Automatic clockwork
This watch automatically charges from the energy caused by your movement. If the battery is emptied, it only needs a few seconds of movement/energy to start working again.
Water protection: 50 meter (5 bar)
This watch can resist water, but should not be worn while swimming. The value refers to the pressure in water, at that depth, while motionless... and should not be seen as the depth for wearing the watch..
Condensation - important!
Rapid changes in temperature can cause condensation inside the watch. If you notice moisture beneath the glass, you should immediately go to a watchmaker, who can open and dry the watch. Even if the signs of moisture disappears, by themselves... the moisture will not - and will eventually damage your watch - so, visit a professional and remove it permanently. Even waterproof watches are not protected against condensation, so keep that in mind if you plan to go from very hot to very cold temperatures - like from a hot sauna directly to the snow. If condensation occurs, it very rarely (if ever) depends on manufacturing, so if your watch is damaged by moisture, warranty will probably not cover it (it could be manufacturing issues, but... most likely it will be because of the rapid change of temperature = natural causes).
Case made of stainless steel.
Sizes
Does this watch fit your wrist? Wristwatches has gradually become larger in size, and a typical men's watch is usually between 40 and 45 mm wide. If you have a wrist that is noticeable larger/smaller, we recommend that you focus on the sizes in/outside the outer edges of the typical sizes. You are always welcome to contact our support, so we can share our experience with you.
This product description is created specifically for Watchia.com and may not be copied (in whole or in parts)! Violation will therefore be met by demands of compensation.
| Diameter | 43 mm |
|---|---|
| Case depth | 12 mm |
| Modelnumber | 11277264055LS |
| EAN | 5709868397103 |
| Brand | Oris |
| Gender | Men |
| Strap type | Leather |
| Strap color | Black |
| Band length | 14-22 cm |
| Clasp Type | Deployment clasp |
| Case material | Stainless steel |
| Case color | Silver |
| Color of dial | Navy |
| Glass | Sapphire |
| Water resistance | 5 atm (splashproof/rain) |
| Movement | Automatic |
How is the size of the watch measured?
The diameter
The common term is diameter, but since not all watches have circular watch cases, the diameter is actually the width measured from left to right. Note that some manufacturers include the crown (to set the clock) and the buttons when measuring the width, but we try to standardize all the watches by not including the crown as part of the measured width.
The thickness - or height of the watch in profile - is indicated by measuring the watch from top to bottom as illustrated below. By comparison, a 1-euro coin is 2.33 millimeters thick.
One usually defines the watches with these numbers:
Slim: 4-6 millimeter
Normal: 6-12 millimeter
Big: 12-14 millimeter
Oversize: 14-18 millimeter
If you buy this watch together with: and ; tools to easily adjust/replace your bracelet/strap, we will give you a big discount.
We also recommend , for removing scratches on metal - or if you just want to make it look new again. If you have scratches on glass, then this is the item for you: .
